<p><strong>Single Channel IP to HDMI Re-Coder</strong></p><p id="isPasted">The IP2HDMI-01 module processes video and audio streams from IP cameras and converts them to an HDMI format output.</p><p>Supporting up to 4K resolution, the IP2HDMI is the perfect tool for displaying Ultra High Definition IP cameras, such as the IRIS-PHOTON range on a chart plotter that supports 4K video inputs, such as Garmin’s 9000 series MFD’s, or displaying the cameras on a UHD TV.</p><p>With a secondary VGA output for legacy systems the device simply needs to be configured onto your camera network and then the IP address of your camera set.</p><p>Small, lightweight and lowpower, with surface mounting ears, the device can easily be installed behind a TV or chart plotter with very little power budget required.</p><p>The device is ONVIF Profile S compliant and supports all leading IP camera protocols.</p><p><strong>Features:</strong></p><ul><li>Converts IP Camera Stream to HDMI (and VGA)</li><li>Perfect for showing IP Cameras on TV and Chart Plotters</li><li>Supports Up to 4K Ultra Hi-Def Video</li><li>Supports all major IP Camera Formats and Compression</li><li>Small, Compact and Low Cost</li><li>Easy Installation and Low Power Consumption</li><li>Supports ONVIF Profile S</li><li>Ideal for On Board and In Vehicle Camera Systems</li></ul><p><strong>Specifications:</strong></p><ul><li>Weight/Dimensions - .5lbs / 6.7" x 2.4" x 1.4"</li><li>Material - Aluminum, Hard Anodized </li><li>Video Output Formats - 1 x HDMI port / 1 x VGA port (Simultaneous output)</li><li>Camera Input - 1 x Ethernet RJ45 10/100</li><li>Supported Resolution - Variable - Up to 4K (8MP)</li><li>Protocols - TCP/IP, P2P, UPnP, NTP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, SMTP, RTSP, ONVIF</li><li>Compression - Ultra 265/H.265/H.264</li><li>Input Voltage - 12VDC</li><li>Power Consumption - <5W</li><li>Environmental - IP30 - Install in a Dry Dust Free Environment. Do not expose to moisture</li></ul> <!--- cis2:m2lumJ1t --->